Vector Analysis
Introduction to Electrodynamics ยท 73 exercises
Q5P
A uniform current density fills a slab straddling the plane, from to . A magnetic dipole is situated at the origin.
(a) Find the force on the dipole, using Eq. 6.3.
(b) Do the same for a dipole pointing in the direction: .
(c) In the electrostatic case, the expressions and are equivalent (prove it), but this is not the case for the magnetic analogs (explain why). As an example, calculate for the configurations in (a) and (b).
4 step solution
Q1.1P
Using the definitions in Eqs. 1.1 and 1.4, and appropriate diagrams, show that the dot product and cross product are distributive,
a) when the three vectors are coplanar;
b) in the general case.
2 step solution
Q2P
Is the cross product associative?
If so, prove it; if not, provide a counterexample (the simpler the better).
3 step solution
Q1.3P
Find the angle between the body diagonals of a cube.
3 step solution
Q1.4P
Use the cross product to find the components of the unit vector perpendicular to the shaded plane in Fig. 1.11.
3 step solution
Q1.5P
Prove the BAC-CAB rule by writing out both sides in component form.
4 step solution
Q6P
Prove that. Under what conditions does ?
2 step solution
Q7P
Find the separation vector r from the source point (2,8,7) to the field point ( 4,6,8). Determine its magnitude ( r ), and construct the unit vector
4 step solution
Q8P
(a) Prove that the two-dimensional rotation matrix (Eq.1.29) preserves dot products.
(That is, show that .)
(b) What constraints must the elements (Rij ) of the three-dimensional rotation matrix
(Eq.1.30) satisfy, in order to preserve the length of A (for all vectors )?
2 step solution
Q9P
Find the transformation matrix R that describes a rotation by 120° about an axis from the origin through the point (1, 1, 1). The rotation is clockwise as you look down the axis toward the origin.
6 step solution
Q10P
(a) How do the components of a vectoii transform under a translation of coordinates (X= x, y = y- a, z = z, Fig. 1.16a)?
(b) How do the components of a vector transform under an inversion of coordinates (X= -x, y = -y, z = -z, Fig. 1.16b)?
(c) How do the components of a cross product (Eq. 1.13) transform under inversion? [The cross-product of two vectors is properly called a pseudovector because of this "anomalous" behavior.] Is the cross product of two pseudovectors a vector, or a pseudovector? Name two pseudovector quantities in classical mechanics.
(d) How does the scalar triple product of three vectors transform under inversions? (Such an object is called a pseudoscalar.)
4 step solution
1.11P
Find the gradients of the following functions:
(a) 4 +3 + 4
(b) 2 y3 z4
(c) x
5 step solution
1.12P
The height of a certain hill (in feet) is given by 2 2
Where y is the distance (in miles) north, x the distance east of South Hadley.
(a) Where is the top of hill located?
(b) How high is the hill?
(c) How steep is the slope (in feet per mile) at a point 1 mile north and one mile east of South Hadley? In what direction is the slope steepest, at that point?
5 step solution
Q1.12P
The height of a certain hill (in feet) is given by
Where y is the distance (in miles) north, x the distance east of South Hadley.
(a) Where is the top of hill located?
(b) How high is the hill?
(c) How steep is the slope (in feet per mile) at a point 1 mile north and one mileeast of South Hadley? In what direction is the slope steepest, at that point?
5 step solution
Q1.11P
Find the gradients of the following functions:
(a)
(b)
(c)
5 step solution
Q13P
Let be the separation vector from a fixed point to the point , and let r be its length. Show that
(a)
(b)
(c) What is the general formula for
4 step solution
Q14P
Suppose that f is a function of two variables (y and z) only. Show that the gradient transforms as a vector under rotations, Eq 1.29. [Hint: and the analogous formula for . We know that and ”solve” these equations for y and z (as functions of and (as functions of and ), and compute the needed derivatives , etc]
2 step solution
Q15P
Calculate the divergence of the following vector functions:
4 step solution
Q16P
Sketch the vector function
and compute its divergence. The answer may surprise you ... can you explain it?
4 step solution
Q17P
In two dimensions, show that the divergence transforms as a scalar under rotations. [Hint: Use Eq. 1.29 to determine and and the method of Prob. 1.14 to calculate the derivatives. Your aim is to show that
4 step solution
Q18P
Calculate the curls of the vector functions in Prob. 1.15.
6 step solution
Q19P
Draw a circle in the xy plane. At a few representative points draw the vector v tangent to the circle, pointing in the clockwise direction. By comparing adjacent vectors, determine the sign of and According to Eq. 1.41, then, what is the direction of ? Explain how this example illustrates the geometrical interpretation of the curl.
5 step solution
Q20P
Construct a vector function that has zero divergence and zero curl everywhere. (A constant will do the job, of course, but make it something a little more interesting than that!)
4 step solution
Q1.22 P
(a) If A and B are two vector functions, what does the expression mean?(That is, what are its x, y, and z components, in terms of the Cartesian componentsof A, B, and V?)
(b) Compute , where is the unit vector defined in Eq. 1.21.
(c) For the functions in Prob. 1.15, evaluate .
4 step solution
Q21P
Prove product rules (i), (iv), and (v)
5 step solution
Q22P
(a) If A and B are two vector functions, what does the expression mean?(That is, what are its x, y, and z components, in terms of the Cartesian componentsof A, B, and V?)
(b) Compute , where r is the unit vector defined in Eq. 1.21.
(c) For the functions in Prob. 1.15, evaluate .
4 step solution
Q23P
(For masochists only.) Prove product rules (ii) and (vi). Refer to Prob. 1.22 for the definition of .
3 step solution
Q24P
Derive the three quotient rules.
3 step solution
Q25P
(a) Check product rule (iv) (by calculating each term separately) for the functions
(b) Do the same for product rule (ii).
(c) Do the same for rule (vi).
4 step solution
Q26P
Calculate the Laplacian of the following functions:
(a)
(b)
(c) .
(d)
5 step solution
Q26P
Calculate the Laplacian of the following functions:
5 step solution
Q27P
Prove that the divergence of a curl is always zero. Check it for function in Prob. 1.15.
3 step solution
Q28P
Prove that the curl of a gradient is always zero. Check it for function(b) in Pro b. 1.11.
2 step solution
1.13P
Calculate the volume integral of the function 2 over the tetrahedron with comers at (0,0,0), (1,0,0), (0,1,0), and (0,0,1).
2 step solution
Q1.31P
Calculate the volume integral of the function over the tetrahedron with comers at (0,0,0), (1,0,0), (0,1,0), and (0,0,1).
2 step solution
Q29P
Calculate the line integral of the function from the origin to the point (1,1,1) by three different routes:
(a)
(b)
(c) The direct straight line.
(d) What is the line integral around the closed loop that goes out along path (a) and back along path (b)?
8 step solution
Q30P
Calculate the surface integral of the function in Ex. 1.7, over the bottom of the box. For consistency, let "upward" be the positive direction. Does the surface integral depend only on the boundary line for this function? What is the total flux over the closed surface of the box (including the bottom)? [Note: For the closed surface, the positive direction is "outward," and hence "down," for the bottom face.]
7 step solution
Q32P
Check the fundamental theorem for gradients, using the points and the three paths in Fig. 1.28.
(c) The parabolic path
5 step solution
Q33P
Test the divergence theorem for the function .Take as your volume the cube shown in Fig. 1.30, with sides of length 2.
8 step solution
1.34P
Test Stokes' theorem for the function , using the triangular shaded area of Fig. 1.34.
5 step solution
Q1.34P
Test Stokes' theorem for the function , using the triangular shaded area of Fig. 1.34.
4 step solution
Q35P
Question: Check Corollary 1 by using the same function and boundary line as in Ex. 1.11, but integrating over the five faces of the cube in Fig. 1.35. The back of the cube is open.
7 step solution
Q36P
(a) Show that
(b) Show that
4 step solution
1.38P
Express the unit vectors in terms of x, y, z (that is, derive Eq. 1.64). Check your answers several ways ( ? 1, ? ?), .Also work out the inverse formulas, giving x, y, z in terms of (and ).
5 step solution
Q1.38P
Express the unit vectors in terms of x, y, z (that is, deriveEq. 1.64). Check your answers several ways ( , , ).Also work out the inverse formulas, giving x, y, z in terms of (and ).
5 step solution
Q37P
Question: Find formulas for in terms of x, y, z (the inverse, in other words, of Eq. 1.62)
2 step solution
Q39P
(a) Check the divergence theorem for the function , using as your volume the sphere of radius R, centred at the origin.
(b) Do the same for . (If the answer surprises you, look back at Prob. 1.16)
2 step solution
Q40P
Compute the divergence of the function
Check the divergence theorem for this function, using as your volume the inverted hemispherical bowl of radius R, resting on the xy plane and centered at the origin (Fig. 1.40).
4 step solution
Q43P
Question: (a) Find the divergence of the function
(b) Test the divergence theorem for this function, using the quarter-cylinder (radius 2, height 5) shown in Fig. 1.43.
(c) Find the curl of v.
4 step solution
Q41P
Compute the gradient and Laplacian of the function. Check the Laplacian by converting T to Cartesian coordinates and using Eq. 1.42. Test the gradient theorem for this function, using the path shown in Fig. 1.41, from (0, 0, 0) to (0, 0, 2).
7 step solution