Chapter 22

Chemistry: An Atoms-Focused Approach · 59 exercises

Problem 11

What is the difference between an essential element and a nonessential element?

3 step solution

Problem 13

What is the main criterion that distinguishes major, trace, and ultratrace essential elements from one another?

5 step solution

Problem 15

The concentrations of very dilute solutions are sometimes expressed as parts per million. Express the concentration of each of the following trace and ultratrace essential elements in parts per million: a. Fluorine, \(110 \mathrm{mg}\) in \(70 \mathrm{kg}\) b. Silicon, \(525 \mathrm{mg} / \mathrm{kg}\) c. Iodine, \(0.043 \mathrm{g}\) in \(100 \mathrm{kg}\)

3 step solution

Problem 16

In the human body, the concentrations of ultratrace essential elements are even lower than those of trace essential elements and therefore are sometimes expressed in parts per billion. Express the concentrations of each of the following elements in parts per billion: a. Bromine, \(6 \mathrm{mg} / \mathrm{L}\) b. Boron, \(0.014 \mathrm{g} / 100 \mathrm{kg}\) c. Selenium, \(5.0 \mathrm{mg} / 70 \mathrm{kg}\)

5 step solution

Problem 17

In the following pairs, which element is more abundant in the human body? (a) silicon or oxygen; (b) iron or oxygen; (c) carbon or aluminum

3 step solution

Problem 18

In the following pairs, which element is more abundant in the human body? (a) \(\mathrm{H}\) or \(\mathrm{Si} ;\) (b) Ca or \(\mathrm{Fe} ;\); \(\mathrm{c}\) ) \(\mathrm{N}\) or \(\mathrm{Cr}.\)

4 step solution

Problem 19

In Chapter 2 we defined main group elements as those elements found in groups \(1,2,\) and \(13-18\) in the periodic table. Why do some chemists refer to these as the "s-block" and "p-block" elements?

4 step solution

Problem 20

Why do we classify the main group elements by group rather than period?

5 step solution

Problem 21

Lithium oxide \(\left(\mathrm{Li}_{2} \mathrm{O}\right)\) and carbon monoxide (CO) have nearly the same molar mass. Why is \(\mathrm{Li}_{2} \mathrm{O}\) a solid with a high melting point whereas CO is a gas?

4 step solution

Problem 22

The nonradioactive group 17 elements are found as diatomic molecules, \(\mathrm{X}_{2}(\mathrm{X}=\mathrm{F}, \mathrm{Cl}, \mathrm{Br}, \mathrm{I}) .\) Why is \(\mathrm{Br}_{2}\) a liquid at room temperature whereas \(\mathrm{Cl}_{2}\) is a gas?

4 step solution

Problem 23

Which of the following properties can be used to distinguish a metallic element from a semimetallic element: atomic radius, electrical conductivity, and/or molar mass?

5 step solution

Problem 24

Which of the following cannot be measured: ionization energy, electron affinity, ionic radius, atomic radius, or electronegativity?

3 step solution

Problem 26

\(\mathrm{PbS}, \mathrm{PbCO}_{3},\) and \(\mathrm{PbCl}(\mathrm{OH})\) have limited solubility in water. Which of them is(are) more likely to dissolve in acidic solutions?

4 step solution

Problem 27

Which ion channel must accommodate the larger cation, a potassium or a sodium ion channel?

3 step solution

Problem 28

Which ion is larger: \(\mathrm{Cl}^{-}\) or \(\mathrm{I}^{-} ?\)

5 step solution

Problem 29

Place the following ions in order of increasing ionic radius: \(\mathrm{Mg}^{2+}, \mathrm{Li}^{+}, \mathrm{Al}^{3+},\) and \(\mathrm{Cl}^{-}.\)

5 step solution

Problem 30

Place the following ions in order of increasing ionic radius: \(\mathrm{Br}^{-}, \mathrm{O}^{2-}, \mathrm{K}^{+},\) and \(\mathrm{Ca}^{2+}.\)

4 step solution

Problem 31

Place the following elements in order of increasing electronegativity: \(\mathrm{K}, \mathrm{S}, \mathrm{F},\) and \(\mathrm{Mg}.\)

6 step solution

Problem 33

How is the electron affinity of Cl atoms related to the ionization energy of \(\mathrm{Cl}^{-}\) ions?

4 step solution

Problem 34

Place the following ions in order of increasing ionization energy: \(\mathrm{Na}^{+}, \mathrm{S}^{2-}, \mathrm{F}^{+},\) and \(\mathrm{Mg}^{+}\),

3 step solution

Problem 35

Ion Transport in Cells Describe three ways in which ions of major essential elements (such as \(\mathrm{Na}^{+}\) and \(\mathrm{K}^{+}\) ) enter and exit cells.

3 step solution

Problem 36

Which transport mechanism for ions requires ATP: diffusion, ion channels, or ion pumps?

3 step solution

Problem 37

Why is it difficult for ions to diffuse across cell membranes?

5 step solution

Problem 38

Why does \(\mathrm{Sr}^{2+}\) substitute for \(\mathrm{Ca}^{2+}\) in bones?

5 step solution

Problem 39

Which alkali metal ion is \(\mathrm{Rb}^{+}\) most likely to substitute for?

3 step solution

Problem 40

Why don't alkaline earth metal cations substitute for alkali metal cations in cases where the ionic radii are similar?

5 step solution

Problem 41

Why might nature have selected calcium carbonate over calcium sulfate as the major exoskeleton material in shells?

5 step solution

Problem 42

Bromide ion and fluoride ion are nonessential elements in the body. Do you expect their concentrations to be more similar to the concentrations of major essential elements or to the concentrations of ultratrace essential elements?

3 step solution

Problem 43

Osmotic Pressure of Red Blood Cells One of the functions of the alkali metal cations \(\mathrm{Na}^{+}\) and \(\mathrm{K}^{+}\) in cells is to maintain the cells' osmotic pressure. The concentration of NaCl in red blood cells is approximately \(11 \mathrm{m} M .\) Calculate the osmotic pressure of this solution at body temperature \(\left.\left(37^{\circ} \mathrm{C}\right) . \text { (Hint: See Equation } 11.2 .\right)\)

4 step solution

Problem 45

Electrochemical Potentials across Cell Membranes Very different concentrations of \(\mathrm{Na}^{+}\) ions exist in red blood cells \((11 \mathrm{m} M)\) and the blood plasma \((160 \mathrm{mM})\) surrounding those cells. Solutions with two different concentrations separated by a membrane constitute a concentration cell. Calculate the electrochemical potential created by the unequal concentrations of \(\mathrm{Na}^{+}\) at \(37^{\circ} \mathrm{C}.\)

4 step solution

Problem 50

Algae in the genus Closterium contain structures built from barium sulfate (barite). Calculate the solubility in moles per liter of \(\mathrm{BaSO}_{4}\) in water at \(25^{\circ} \mathrm{C}\) given that \(K_{\mathrm{sp}}=1.08 \times 10^{-10}.\)

4 step solution

Problem 53

What are the likely signs of \(\Delta S\) and \(\Delta G\) for the dissolution of tooth enamel?

4 step solution

Problem 54

Why does fluorapatite resist acid better than hydroxyapatite if both are insoluble in water?

4 step solution

Problem 55

Why do peroxide ions \(\left(\mathrm{O}_{2}^{2-}\right)\) act as strong oxidizing agents?

4 step solution

Problem 57

What are the products of radioactive decay of \(^{137} \mathrm{Cs} ?\) Write a balanced equation for the nuclear decay reaction.

3 step solution

Problem 58

Potassium- 40 decays by three pathways: \(\beta\) decay, positron emission, and electron capture. Write balanced equations for each of these processes.

3 step solution

Problem 61

Composition of Tooth Enamel Tooth enamel contains the mineral hydroxyapatite. Hydroxyapatite reacts with fluoride ion in toothpaste to form fluorapatite. The equilibrium constant for the reaction between hydroxyapatite and fluoride ion is \(K=8.48 .\) Write the equilibrium constant expression for the following reaction. In which direction does the equilibrium lie? \(\mathrm{Ca}_{5}\left(\mathrm{PO}_{4}\right)_{3}(\mathrm{OH})(s)+\mathrm{F}^{-}(a q) \rightleftharpoons \mathrm{Ca}_{5}\left(\mathrm{PO}_{4}\right)_{3}(\mathrm{F})(s)+\mathrm{OH}^{-}(a q)\)

2 step solution

Problem 62

Effects of Excess Fluoridation on Teeth Too much fluoride might lead to the formation of calcium fluoride according to the reaction $$\begin{aligned}\mathrm{Ca}_{5}\left(\mathrm{PO}_{4}\right)_{3}(\mathrm{OH})(s)+& 10 \mathrm{F}^{-}(a q) \rightleftharpoons \\\& 5 \mathrm{CaF}_{2}(s)+3 \mathrm{PO}_{4}^{3-}(a q)+\mathrm{OH}^{-}(a q)\end{aligned}$$ Write the equilibrium constant expression for the reaction. Given the \(K_{\mathrm{sp}}\) values for the following two reactions, calculate \(K\) for the reaction between \(\mathrm{Ca}_{5}\left(\mathrm{PO}_{4}\right)_{3}(\mathrm{OH})\) and fluoride ion that forms \(\mathrm{CaF}_{2}\) \(\mathrm{Ca}_{5}\left(\mathrm{PO}_{4}\right)_{3}(\mathrm{OH})(s) \rightleftharpoons 5 \mathrm{Ca}^{2+}(a q)+3 \mathrm{PO}_{4}^{3-}(a q)+\mathrm{OH}^{-}(a q)\) \(K_{\mathrm{sp}}=2.3 \times 10^{-59}\) \(\mathrm{CaF}_{2}(s) \rightleftharpoons \mathrm{Ca}^{2+}(a q)+2 \mathrm{F}^{-}(a q) \quad K_{\mathrm{sp}}=3.9 \times 10^{-11}\)

4 step solution

Problem 63

Tooth enamel is actually a composite material containing both hydroxyapatite and a calcium phosphate, \(\mathrm{Ca}_{8}\left(\mathrm{HPO}_{4}\right)_{2}\left(\mathrm{PO}_{4}\right)_{4} \cdot 6 \mathrm{H}_{2} \mathrm{O}\left(K_{\mathrm{sp}}=1.1 \times 10^{-47}\right)\) a. Is this calcium mineral more or less soluble than hydroxyapatite \(\left(K_{\mathrm{sp}}=2.3 \times 10^{-59}\right) ?\) b. Calculate the solubility in moles per liter of hydroxyapatite, \(\mathrm{Ca}_{5}\left(\mathrm{PO}_{4}\right)_{3}(\mathrm{OH}), K_{\mathrm{sp}}=2.3 \times 10^{-59} \mathrm{in}\) water at \(25^{\circ} \mathrm{C}\) "c. Explain why the production of weak acids by bacteria on teeth and gums increases the solubility of hydroxyapatite.

3 step solution

Problem 64

The \(K_{\mathrm{sp}}\) of actual tooth enamel is reported to be \(1 \times 10^{-58}.\) a. Does this mean that tooth enamel is more soluble than pure hydroxyapatite \(\left(K_{\mathrm{sp}}=2.3 \times 10^{-59}\right) ?\) b. Does the measured value of \(K_{\mathrm{sp}}\) for tooth enamel support the idea that tooth enamel is a mixture of hydroxyapatite, \(\mathrm{Ca}_{5}\left(\mathrm{PO}_{4}\right)_{3}(\mathrm{OH}),\) and a calcium phosphate \(\mathrm{Ca}_{8}\left(\mathrm{HPO}_{4}\right)_{2}\left(\mathrm{PO}_{4}\right)_{4} \cdot 6 \mathrm{H}_{2} \mathrm{O}\left(K_{\mathrm{sp}}=1.1 \times 10^{-47}\right) ?\) c. Calculate the solubility in moles per liter of \(\mathrm{Ca}_{8}\left(\mathrm{HPO}_{4}\right)_{2}\left(\mathrm{PO}_{4}\right)_{4} \cdot 6 \mathrm{H}_{2} \mathrm{O}\left(K_{\mathrm{sp}}=1.1 \times 10^{-47}\right) \mathrm{in}\) water at \(25^{\circ} \mathrm{C}\)

4 step solution

Problem 65

Some sources give the formula of hydroxyapatite as \(\mathrm{Ca}_{10}\left(\mathrm{PO}_{4}\right)_{6}(\mathrm{OH})_{2} .\) If the \(K_{\mathrm{sp}}\) of \(\mathrm{Ca}_{5}\left(\mathrm{PO}_{4}\right)_{3}(\mathrm{OH})\) is \(2.3 \times 10^{-59},\) what is the \(K_{\mathrm{sp}}\) of \(\mathrm{Ca}_{10}\left(\mathrm{PO}_{4}\right)_{6}(\mathrm{OH})_{2} ?\)

4 step solution

Problem 67

All of the group 16 elements form compounds with the generic formula \(\mathrm{H}_{2} \mathrm{E}(\mathrm{E}=\mathrm{O}, \mathrm{S}, \mathrm{Se}, \text { or } \mathrm{Te}) .\) Which compound is the most polar? Which compound is the least polar?

4 step solution

Problem 68

All of the group 15 elements form compounds with the generic formula \(\mathrm{H}_{3} \mathrm{E}(\mathrm{E}=\mathrm{N}, \mathrm{P}, \mathrm{As}, \mathrm{Sb}, \text { and } \mathrm{Bi}) .\) Which compound is the most polar? Which compound do you predict to have the smallest H-E-H bond angle?

5 step solution

Problem 69

When choosing an isotope for imaging, why is it important to consider the decay mode of the isotope as well as the half-life?

4 step solution

Problem 70

Why might an \(\alpha\) emitter be a good choice for radiation therapy?

5 step solution

Problem 71

What advantage does a \(\beta\) emitter have over an \(\alpha\) emitter for imaging?

3 step solution

Problem 72

Why do we sometimes use radioisotopes of toxic elements, such as thallium, for imaging?

4 step solution

Problem 73

Why does \(^{213}\) Bi undergo \(\beta\) decay but \(^{111}\) In decays by electron capture?

6 step solution

Problem 74

Several isotopes of arsenic are used in medical imaging. Which isotope, \(^{72}\) As or \(^{77}\) As, is more likely to be useful for PET imaging?

4 step solution

Problem 75

The World Anti-Doping Agency (WADA) added xenon and argon to the list of banned substances in \(2014 .\) Which intermolecular forces account for the solubility of Xe and Ar in blood?

5 step solution

Show/ page