Chapter 10

The unit of specific reaction rate constant for a firstorder (if the concentration is expressed in molarity) would be (a) \(s^{-1}\) (b) mole \(\mathrm{s}^{-1}\) (c) mole \(L^{-1} s^{-1}\) (d) mole \(L^{-1}\)

The activation energy for a simple chemical reaction \(\mathrm{A} \longrightarrow \mathrm{B}\) is \(\mathrm{E}\) in forward direction. The activation energy for reverse reaction (a) can be less than or more than \(\mathrm{E}\) (b) is always double of \(\mathrm{E}\) (c) is negative of \(\mathrm{E}_{4}\) (d) is always less than \(\mathrm{E}_{\mathrm{a}}\)

\(3 \mathrm{~A} \longrightarrow \mathrm{B}+\mathrm{C}\) It would be a zero order reaction when (a) the rate of reaction is proportional to square of concentration of \(\mathrm{A}\) (b) the rate of reaction remains same at any concentration of \(\mathrm{A}\) (c) the rate remains unchanged at any concentration of \(\mathrm{B}\) and \(\mathrm{C}\) (d) the rate of reaction doubles if concentration of is increased to double

The rate of reaction depends upon (a) molar concentration (b) atomic mass (c) equivalent mass (d) none of these

For a first-order reaction, the half-life period is independent of (a) initial concentration (b) cube root of initial concentration (c) first power of final concentration (d) square root of final concentration

The first-order rate constant for the decomposition of \(\mathrm{N}_{2} \mathrm{O}_{5}\) is \(6.2 \times 10^{-4} \mathrm{~s}^{-1}\). The half-life for this decomposition is (a) \(1177.7 \mathrm{~s}\) (b) \(1117.7\) (c) \(6.077 \mathrm{~s}\) (d) \(110.77\)

If the rate of the reaction is equal to the rate constant, the order of the reaction is (a) 3 (b) 0 (c) 1 (d) 2

Which of the following best explains the effects of a catalyst on the rate of a reversible reaction? (a) It decreases the rate of the reverse reaction (b) It increases the kinetic energy of the reacting molecules (c) It moves the equilibrium position to the right (d) It provides a new reaction path with a lower activation energy

For a chemical reaction \(\mathrm{A} \longrightarrow \mathrm{B}\), the rate of reaction doubles when the concentration of \(\mathrm{A}\) is in creased four times. The order of reaction for \(\mathrm{A}\) is (a) zero (b) one (c) two (d) half

The unit of second-order reaction rate constant is (a) \(\mathrm{L}^{-1} \cdot \mathrm{mol}^{-1} \mathrm{ds}^{-1}\) (b) \(\mathrm{L}^{2} \mathrm{~mol}^{-2} \mathrm{~s}^{-1}\) (c) L.mol \(^{-1} \mathrm{~s}^{-1}\) (d) \(s^{-t}\)

Among which of the following factor the specific reaction rate of a first- order reaction depends on (a) temperature (b) concentration of reactant (c) pressure (d) volume

The molecularity of a reaction is (a) always two (b) same as its order (c) different than the other (d) may be same or different as compared to order

Which of the following is incorrect about order of reaction? (a) it is calculated experimentally (b) it is sum of powers of concentration in rate law expression (c) the order of reaction cannot be fractional (d) there is not necessarily a connection between order and stoichiometry of a reaction.

For a first-order reaction, (a) The degree of dissociation is equal to \(\left(1-\mathrm{e}^{-\mathrm{k}}\right)\) (b) The pre-exponential factor in the Arrhenius equation has the dimensions of time \(t^{-1}\). (c) The time taken for the completion of \(75 \%\) reaction is thrice the \(t_{1 / 2}\) of the reaction. (d) both (a) and (b)

The rate law for the reaction \(\mathrm{RCl}+\mathrm{NaOH}\) (aq) \(\longrightarrow \mathrm{ROH}+\mathrm{NaCl}\) is given by Rate \(=k[\mathrm{RCl}]\). The rate of the reaction will be (a) doubled on doubling the concentration of sodium hydroxide (b) halved on reducing the concentration of alkyl halide to one half (c) decreased on increasing the temperature of reaction (d) unaffected by increasing the temperature of the reaction.

The rate law has the form; rate \(=k[\mathrm{~A}][\mathrm{B}]^{32}\), can the reaction be an elementary process? (a) yes (b) no (c) may be yes or no (d) cannot be predicted

For a second-order reaction, \(2 \mathrm{~A} \longrightarrow\) Product, a straight line is obtained if we plot (a) concentration vs time (b) log (conc.) vs time (c) log (conc.) vs timel (d) (conce')vs time"

For an endothermic reaction, where \(\Delta \mathrm{H}\) represents the enthalpy of the reaction in \(\mathrm{kJ} / \mathrm{mol}\), the minimum value for the energy of activation will be (a) less than \(\Delta \mathrm{H}\) (b) zero (c) more than \(\Delta \mathrm{H}\) (d) equal to \(\Delta \mathrm{H}\)

The rate constant of a reaction depends on (a) extent of reaction (b) time of reaction (c) temperature (d) initial concentration of the reactants

The function of catalyst in chemical reaction is to (a) increase the product (b) decrease the product (c) accelerate the rate of reaction (d) increase the reactants

According to the collision theory of reaction rates, an increase of the temperature at which the reaction oc curs will inturn increase the rate of the reaction. This caused due to (a) greater number of molecules are having the activation energy (threshold energy) (b) greater velocity of reaction molecules (c) greater number of collisions (d) none of these

For a chemical reaction which can never be a fractional number. (a) order (b) half-life (c) molecularity (d) rate constant

Which of the following is correct for a first order reaction? \(\left(k=\right.\) rate constant \(t_{12}=\) half-life) (a) \(t_{1 / 2}=0.693 \times k\) (b) \(\mathrm{k} . \mathrm{t}_{v 2}=1 / 0.693\) (c) \(\mathrm{k}, \mathrm{t}_{1 / 2}=0.693\) (d) \(6.93 \times k \times t_{1 / 2}=1\)

Which of the following relation is correct for a first order reaction? \((k=\) rate constant; \(\mathrm{r}=\) rate of reaction; \(\mathrm{C}=\) conc, of reactant) (a) \(k=\mathrm{r} \times \mathrm{C}^{2}\) (b) \(k=\mathbf{r} \mathbf{x}\) (c) \(k=\mathrm{C} / r\) (d) \(k=\mathrm{r} / \mathrm{C}\)

Rate constant of a reaction \((k)\) is \(175 \mathrm{~L}^{2} \mathrm{~mol}^{-2} \sec ^{-1}\). What is the order of reaction? (a) first (b) second (c) third (d) zero

A catalyst is a substance which (a) supplies energy to the reaction (b) increases the equilibrium concentration of the product (c) changes the equilibrium constant of the reaction (d) shortens the time to each equilibrium

The rate of reaction was found to be equal to its rate constant at any concentration of the reactant. The order of the reaction is (a) zero-order (b) first-order (c) second-order (d) third-order

For the reaction \(\mathrm{H}_{2}+\mathrm{Cl}_{2} \stackrel{\text { sunlight }}{\longrightarrow} 2 \mathrm{HCl}\) taking place on water, the order of reaction is (a) 0 (b) \(\underline{1}\) (c) 2 (d) 3

A catalyst increases rate of reaction by (a) decreasing enthalpy (b) decreasing activation energy (c) decreasing internal energy (d) increasing activation energy

The rate constant is given by the equation \(\mathrm{K}=\mathrm{P} . \mathrm{Ze}^{-\mathrm{EKT}}\). Which factor should register a decrease for the reaction to proceed more rapidly (a) \(\mathrm{T}\) (b) \(\mathrm{Z}\) (c) \(\underline{\mathrm{E}}\) (d) \(\mathrm{P}\)

Which of the following statement is correct? (a) A plot of \(\log k\) vs \(1 / t\) is linear (b) A plot of \(\log [\mathrm{X}]\) vs time is linear for a first-order reaction, \(\mathrm{X} \longrightarrow \mathrm{P}\) (c) A plot of log P vs \(1 / t\) is linear at constant volume (d) A plot of \(\mathrm{P}\) vs \(1 / \mathrm{V}\) is linear at constant pressure

For a zero-order reaction, the plot of concentration vs time is linear with (a) +ve slope and zero intercept (b) -ve slope and zero intercept (c) tve slope and non-zero intercept (d) -ve slope and non-zero intercept

Graph between \(\log _{10} \mathrm{~K}\) and \((1 / t)\) is linear with slope \(S\). Hence \(\mathrm{E}\) is (a) \(\mathrm{R} \times \mathrm{S}\) (b) \(\mathrm{S} / \mathrm{R}\) (c) \(\mathrm{R} / \mathrm{S}\) (d) \(2.303 \mathrm{RS}\)

A substance undergoes first-order decomposition, it follows two parallel reactions \(k_{1}=1.26 \times 10^{-4} \mathrm{~s}^{-1}\) and \(k_{2}=3.8 \times 10^{-5} \mathrm{~s}^{-1}\) The percentage distribution of \(\mathrm{Y}\) and \(\mathrm{Z}\) are (a) \(80 \% \mathrm{Y}\) and \(20 \% \mathrm{Z}\) (b) \(72.83 \% \mathrm{Y}\) and \(32.71 \% \mathrm{Z}\) (c) \(76.83 \% \mathrm{Y}\) and \(23.17 \% \mathrm{Z}\) (d) \(62.4 \% \mathrm{Y}\) and \(90.5 \% \mathrm{Z}\)

\(75 \%\) of a first-order reaction was completed in 32 min. When was \(50 \%\) of the reaction completed? (a) \(24 \mathrm{~min}\) (b) \(16 \mathrm{~min}\) (c) \(8 \mathrm{~min}\) (d) \(64 \mathrm{~min}\)

For a first-order reaction, \(t_{0.9}\) is \(138.6\) seconds. Its specific reaction rate constant (in \(\left.\sec ^{-1}\right)\) is (a) \(10^{-2}\) (b) \(10^{-4}\) (c) \(10^{-5}\) (d) \(10^{-6}\)

For the first-order reaction half-life is \(14 \mathrm{~s}\). The time required for the initial concentration to reduce to \(1 / 8\) th of its value is (a) \(21 \mathrm{~s}\) (b) \(32 \mathrm{~s}\) (c) \(42 \mathrm{~s}\) (d) \(14^{2} \mathrm{~s}\)

Under the same reactions conditions, initial concentration of \(1.386 \mathrm{~mol} \mathrm{dm}^{-3}\) of a substance becomes half in 40 sec and 20 sec through \(1^{\text {t }}\) order and zero order kinetics respectively. Ratio \(\left[\frac{\mathrm{K}_{1}}{\mathrm{~K}_{0}}\right]\) of the rate constants for first order \(\left(\mathrm{k}_{1}\right)\) and zero order \(\left(\mathrm{k}_{0}\right)\) of the reactions is (a) \(0.5 \mathrm{~mol}^{-1} \mathrm{dm}^{-3}\) (b) \(1 \mathrm{~mol} \mathrm{dm}^{-3}\) (c) \(1.5 \mathrm{~mol} \mathrm{dm}^{-3}\) (d) \(2 \mathrm{~mol}^{-1} \mathrm{dm}^{3}\)

The half-life of a substance in a first-order reaction is 15 minutes. The rate constant is (a) \(2.46 \times 10^{2} \mathrm{~min}^{-1}\) (b) \(4.62 \times 10^{-2} \mathrm{~min}^{-1}\) (c) \(3 \times 10^{-5} \mathrm{~min}^{-1}\) (d) \(3 \times 10^{-4} \mathrm{~min}^{-1}\)

In a second-order reaction, if first-order is observed for both the reactants \(\mathrm{A}\) and \(\mathrm{B}\), then which one of the following reactant mixtures will provide the highest initial rate? (a) \(0.1 \mathrm{~mol}\) of \(\mathrm{A}\) and \(0.1 \mathrm{~mol}\) of in \(0.2\) litre solvent (b) \(1.0 \mathrm{~mol}\) of \(\mathrm{A}\) and \(1.0 \mathrm{~mol}\) of in one litre solvent (c) \(0.2 \mathrm{~mol}\) of \(\mathrm{A}\) and \(0.2 \mathrm{~mol}\) of in \(0.1\) litre solvent (d) \(0.1 \mathrm{~mol}\) of \(\mathrm{A}\) and \(0.1 \mathrm{~mol}\) of in \(0.1\) litre solvent

The activation energy of a reaction is \(9 \mathrm{kcal} /\) mole. The increase in the rate constant when its temperature is raised from 295 to 300 is (a) \(14.9 \%\) (b) \(28.9 \%\) (c) \(78.9 \%\) (d) \(82.9 \%\)

The rate constant of first-order reaction is \(3 \times 10^{-6}\) per second. The initial concentration is \(0.10 \mathrm{M}\). The initial rate is (a) \(3 \times 10^{-7} \mathrm{Ms}^{-1}\) (b) \(3 \times 10^{-4} \mathrm{Ms}^{-1}\) (c) \(3 \times 10^{-5} \mathrm{Ms}^{-1}\) (d) \(3 \times 10^{-6} \mathrm{Ms}^{-1}\)

Consider the following statements: (1) rate of a process is directly proportional to its free energy change (2) the order of an elementary reaction step can be determined by examining the stoichiometry (3) the first-order reaction describe exponential time course. Of the statements (a) 1 and 2 are correct (b) 1 and 3 are correct (c) 2 and 3 are correct (d) 1,2 and 3 are correct

In a first-order reaction \(\mathrm{A} \longrightarrow \mathrm{P}\), the ratio of \(\mathrm{a} /(\mathrm{a}-\mathrm{x})\) was found to be 8 after 60 minutes. If the concentration is \(0.1 \mathrm{M}\) then the rate of reaction in moles of A reacted per minutes is (a) \(2.226 \times 10^{-5} \mathrm{~mol}\) litre \(^{-1} \mathrm{~min}^{-1}\) (b) \(3.466 \times 10^{-3}\) mol litre \(^{-1} \mathrm{~min}^{-1}\) (c) \(4.455 \times 10^{-3}\) mol litre \(^{-4} \mathrm{~min}^{-1}\) (d) \(5.532 \times 10^{-3}\) mol litre- \(^{-1} \min ^{-1}\)

In the following reaction, how is the rate of appear ance of the underlined product related to the rate of disappearance of the underlined reactant? \(\mathrm{BrO}_{3}^{-}(\mathrm{aq})+5 \mathrm{Br}(\mathrm{aq})+6 \mathrm{H}^{+}(\mathrm{aq}) \longrightarrow 3 \mathrm{Br}_{2}\) (I) \(+3 \mathrm{H}_{2} \mathrm{O}(\mathrm{l})\) (a) \(\frac{\mathrm{d}\left[\mathrm{Br}_{2}\right]}{\mathrm{dt}}=-\frac{5}{3} \frac{\mathrm{d}\left[\mathrm{Br}^{-}\right]}{\mathrm{dt}}\) (b) \(\frac{\mathrm{d}\left[\mathrm{Br}_{2}\right]}{\mathrm{dt}}=-\frac{\mathrm{d}[\mathrm{Br}]}{\mathrm{dt}}\) (c) \(\frac{\mathrm{d}\left[\mathrm{Br}_{2}\right]}{\mathrm{dt}}=\frac{\mathrm{d}[\mathrm{Br}]}{\mathrm{dt}}\) (d) \(\frac{\mathrm{d}\left[\mathrm{Br}_{2}\right]}{\mathrm{dt}}=-\frac{3}{5} \frac{\mathrm{d}[\mathrm{Br}]}{\mathrm{dt}}\)

The experimental data for the reaction \(2 \mathrm{~A}+\mathrm{B}_{2} \longrightarrow 2 \mathrm{AB}\) is \(10.2\) Table \begin{tabular}{llll} \hline Exp. & [A] & [B_ ] & Rate \(\left(\mathrm{Ms}^{-1}\right)\) \\ \hline 1. & \(0.50 \mathrm{M}\) & \(0.50 \mathrm{M}\) & \(1.6 \times 10^{-4}\) \\ \(2 .\) & \(0.50 \mathrm{M}\) & \(1.00 \mathrm{M}\) & \(3.2 \times 10^{-4}\) \\ \(3 .\) & \(1.00 \mathrm{M}\) & \(1.00 \mathrm{M}\) & \(3.2 \times 10^{-4}\) \\ \hline \end{tabular} the rate equation for the above data is (a) rate \(=\mathrm{k}\left[\mathrm{B}_{2}\right]\) (b) rate \(=k\left[\mathrm{~B}_{2}\right]^{2}\) (c) rate \(=k[\mathrm{~A}]^{2}[\mathrm{~B}]^{2}\) (d) rate \(=k[\mathrm{~A}]^{2}[\mathrm{~B}]\)

Which of the following are the examples of pseudo-unimolecular reactions? (1) acid catalyzed hydrolysis of an ester (2) inversion of cane sugar (3) decomposition of ozone (4) decomposition of \(\mathrm{N}_{2} \mathrm{O}_{5}\)

For the reaction \(2 \mathrm{~A}+\mathrm{B} \longrightarrow 3 \mathrm{C}+\mathrm{D}\) which of the following does not express the reaction rate? (a) \(\frac{d[\mathrm{D}]}{\mathrm{dt}}\) (b) \(-\frac{d[A]}{2 \mathrm{dt}}\) (c) \(\frac{\mathrm{d}[\mathrm{C}]}{3 \mathrm{dt}}\) (d) \(-\frac{\mathrm{d}[\mathrm{B}]}{d t}\)

A substance reacts according to first-order kinetics. The rate constant for the reaction is \(1 \times\) \(10^{-2} \mathrm{sec}^{1} .\) Its initial concentration is IM. Its initial rate is (a) \(2 \times 10^{2} \mathrm{Ms}^{-1}\) (b) \(1 \times 10^{2} \mathrm{Ms}^{-1}\) (c) \(1 \times 10^{-2} \mathrm{Ms}^{-1}\) (d) \(2 \times 10^{-2} \mathrm{Ms}^{-1}\)

The rate of a certain hypothetical reaction \(\mathrm{A}+\mathrm{B}+\mathrm{C} \longrightarrow\) Produets is given by \(\mathrm{r}=-\frac{\mathrm{d}[\mathrm{A}]}{\mathrm{dt}}=k[\mathrm{~A}]^{1 / 2}[\mathrm{~B}]^{1 / 3}[\mathrm{C}]^{14}\) The order of the reaction is (a) \(13 / 12\) (b) \(13 / 14\) (c) \(12 / 13\) (d) \(13 / 11\)