Q32P - Fundamentals Of Physics

Question

In Fig. 22-55, positive charge $\mathbf{q}\mathbf{ }\mathbf{=}\mathbf{7}\mathbf{.81}\mathbf{ }\mathbf{pC}$ is spread uniformly along a thin non-conducting rod of length $\mathbf{L}\mathbf{ }\mathbf{=}\mathbf{ }\mathbf{14.5}\mathbf{ }\mathbf{cm}$. What are the (a) magnitude and (b) direction (relative to the positive direction of the x axis) of the electric field produced at point P, at distance $\mathbf{R}\mathbf{ }\mathbf{=}\mathbf{6.00}\mathbf{ }\mathbf{cm}$ from the rod along its perpendicular bisector?

Step-by-Step Solution

Answer

1. The magnitude of the electric field produced at point P, along its perpendicular bisector is $12.4\text{\hspace{0.17em}N/C}$.
2. The direction of the electric field produced at point P, along its perpendicular bisector is in the +y-direction, or $+{90}^{\mathrm{o}}$ counter-clockwise from the +x-axis.

Step 1: The given data

• Positive charge $\mathrm{q} =7.81 \text{\hspace{0.17em}pC}$ is spread uniformly along a thin non-conducting rod of length,$\mathrm{L} = 14.5\text{ cm}$ .
• The distance of the point from the rod,$\mathrm{R} =6.00\text{ cm}$ .

Step 2: Understanding the concept of electric field

Using the concept of the electric field for a small charge distributed over a line, the magnitude and direction of the electric field at the given point from the rod can be calculated.

 

Formula:

The magnitude of the electric field at a point, 

     $\mathrm{E}=\frac{\mathrm{q}}{4{\mathrm{\pi \epsilon }}_{\mathrm{o}}{\mathrm{r}}^2}\widehat{\mathrm{r}}\text{ (}\because \widehat{\mathrm{r}}=\mathrm{cos\theta }\widehat{\mathrm{i}}+\mathrm{sin\theta }\widehat{\mathrm{j}}\text{)}$                                                       (i)  

Where, $\mathrm{r}$ = The distance of field point from the charge

$\mathrm{q}$= charge of the particle

The linear density of the distribution,   $\mathrm{\lambda }=\mathrm{q}/\mathrm{L}$                                                 (ii)

Step 3: a) Calculation of the magnitude of the electric field

We assume q > 0. Let, the (infinitesimal) charge on an element $\mathrm{dx}$ of the rod contains charge using equation (i), $\mathrm{dq}$ is $\mathrm{\lambda dx}$. By symmetry, we conclude that all horizontal field components (due to the charges) cancel and we need only “sum” (integrate) of the vertical components. Symmetry also allows us to integrate these contributions over only half the rod $(0\le \mathrm{x} \le \mathrm{L}/2)$. 

Thus, the value of sine from the figure is given as:

$\mathrm{sin\theta }=\mathrm{R}/\mathrm{r}$

where, $\mathrm{r}=\sqrt{{\mathrm{x}}^2+{\mathrm{R}}^2}$.

Using the concept of electric field due a line charge the magnitude of the electric from equation (i) can be given as:

$\begin{array}{c}\left|\overrightarrow{\mathrm{E}}\right|=2\underset{0}{\overset{\mathrm{L}/2}{}}\left(\frac{\mathrm{dq}}{4{\mathrm{\pi \epsilon }}_{\mathrm{o}}{\mathrm{r}}^2}\right)\text{sin}\mathrm{\theta }\\ =\frac{2}{4{\mathrm{\pi \epsilon }}_{\mathrm{o}}}\underset{0}{\overset{\mathrm{L}/2}{}}\left(\frac{\mathrm{\lambda dx}}{{\mathrm{x}}^2+{\mathrm{R}}^2}\right)\frac{\mathrm{y}}{\sqrt{{\mathrm{x}}^2+{\mathrm{R}}^2}}\\ =\frac{(\mathrm{q}/\mathrm{L})\mathrm{R}}{2{\mathrm{\pi \epsilon }}_{\mathrm{o}}}{\left[\frac{\mathrm{x}}{{\mathrm{R}}^2\sqrt{{\mathrm{x}}^2+{\mathrm{R}}^2}}\right]}_0^{\mathrm{L}/2}\\ = \frac{\mathrm{q}}{2{\mathrm{\pi \epsilon }}_{\mathrm{o}}\mathrm{R}}\frac{1}{\sqrt{{\mathrm{L}}^2+4{\mathrm{R}}^2}}\\ =\frac{7.81\mathrm{x}{10}^{-12}\text{C}}{2{\mathrm{\pi \epsilon }}_{\mathrm{o}}\times (0.06\text{\hspace{0.17em}m})\times \sqrt{{(0.145\text{ m})}^2+{(0.06\text{ m})}^2}}\\ =12.4\text{\hspace{0.17em}N/C}\end{array}$

$\mathrm{Hence}, \mathrm{the} \mathrm{value} \mathrm{of} \mathrm{the} \mathrm{electric} \mathrm{field} \mathrm{is} 12.4\text{\hspace{0.17em}N/C}.$

Step 4: b) Calculation of the direction of the electric field

As noted above in the calculations of part (a), the electric field E points in the +y-direction, or $+{90}^{\mathrm{o}}$ counter-clockwise from the +x-axis.