Problem 19
Question
Evaluate the given limits of the piecewise defined functions \(f\). \(\begin{array}{ll}f(x)=\left\\{\begin{array}{cl}x+1 & x<1 \\ 1 & x=1 \\ x-1 & x>1\end{array}\right. & \\ \begin{array}{rlr}\text { (a) } \lim _{x \rightarrow 1^{-}} f(x) & & \text { (c) } \lim _{x \rightarrow 1} f(x) \\\ \text { (b) } \lim _{x \rightarrow 1^{+}} f(x) & & \text { (d) } f(1)\end{array}\end{array}\)
Step-by-Step Solution
Verified Answer
(a) 2, (b) 0, (c) Does not exist, (d) 1.
1Step 1: Analyze the function for \(x < 1\)
For the function \(f(x)=x+1\) when \(x < 1\), we need to inspect how the function behaves as \(x\) approaches 1 from the left (i.e., \(x \to 1^-\)). As \(x\) gets closer to 1 from the left, the value of \(f(x)\) approaches \(1+1=2\).
2Step 2: Evaluate \(\lim_{x \to 1^-} f(x)\)
As we determined in Step 1, since \(f(x) = x + 1\) for \(x < 1\), the limit of \(f(x)\) as \(x\) approaches 1 from the left is 2. Therefore, \(\lim_{x \to 1^-} f(x) = 2\).
3Step 3: Analyze the function for \(x > 1\)
For \(x > 1\), the function is given by \(f(x) = x-1\). As \(x\) approaches 1 from the right (i.e., \(x \to 1^+\)), the value of \(f(x)\) approaches \(1-1=0\).
4Step 4: Evaluate \(\lim_{x \to 1^+} f(x)\)
Based on Step 3, the limit of \(f(x)\) as \(x\) approaches 1 from the right is 0. Thus, \(\lim_{x \to 1^+} f(x) = 0\).
5Step 5: Evaluate \(\lim_{x \to 1} f(x)\)
The overall limit exists only if the limits from both directions are equal. Since \(\lim_{x \to 1^-} f(x) = 2\) and \(\lim_{x \to 1^+} f(x) = 0\), \(\lim_{x \to 1} f(x)\) does not exist because the left-hand and right-hand limits are not equal.
6Step 6: Determine \(f(1)\)
The value of the function specifically at \(x=1\) is defined as \(f(x) = 1\). Hence, \(f(1) = 1\).
Key Concepts
Left-hand LimitRight-hand LimitContinuity at a Point
Left-hand Limit
The concept of the left-hand limit is essential in understanding how a function behaves as it approaches a particular point from the left side. In mathematical terms, we denote this as \( \lim_{x \to c^-} f(x) \), meaning that \( x \) approaches the point \( c \) from values less than \( c \).
To calculate the left-hand limit, we use the piece of the function defined for \( x < c \). For instance, in our given exercise involving a piecewise function, the function is \( f(x) = x + 1 \) for \( x < 1 \). As \( x \) gets closer to 1 from the left, \( f(x) \) approaches \( 1 + 1 = 2 \).
Thus, the left-hand limit for this function as \( x \to 1^- \) is 2. This demonstrates how we evaluate the behavior of piecewise functions using the specific definition applicable to the domain of interest.
To calculate the left-hand limit, we use the piece of the function defined for \( x < c \). For instance, in our given exercise involving a piecewise function, the function is \( f(x) = x + 1 \) for \( x < 1 \). As \( x \) gets closer to 1 from the left, \( f(x) \) approaches \( 1 + 1 = 2 \).
Thus, the left-hand limit for this function as \( x \to 1^- \) is 2. This demonstrates how we evaluate the behavior of piecewise functions using the specific definition applicable to the domain of interest.
Right-hand Limit
The right-hand limit investigates the function's behavior as \( x \) approaches a certain point from the right, i.e., from values greater than the point. This is expressed as \( \lim_{x \to c^+} f(x) \).
In our piecewise function example, the segment applicable for \( x > 1 \) is \( f(x) = x - 1 \). As \( x \) gets nearer to 1 from the right, \( f(x) \) tends to \( 1 - 1 = 0 \).
Consequently, the right-hand limit of the function as \( x \to 1^+ \) is 0. By analyzing the right-hand limit, you can determine how the function progresses from the immediate right of the specified point.
In our piecewise function example, the segment applicable for \( x > 1 \) is \( f(x) = x - 1 \). As \( x \) gets nearer to 1 from the right, \( f(x) \) tends to \( 1 - 1 = 0 \).
Consequently, the right-hand limit of the function as \( x \to 1^+ \) is 0. By analyzing the right-hand limit, you can determine how the function progresses from the immediate right of the specified point.
Continuity at a Point
Continuity at a point is a fundamental concept ensuring that a function behaves predictably at that point without any discontinuities. A function is continuous at a point \( c \) if the following three conditions are satisfied:
In our exercise, continuing the function at \( x = 1 \) would mean that \( f(1) = 1 \), yet the two-sided limit \( \lim_{x \to 1} f(x) \) does not exist since \( \lim_{x \to 1^-} f(x) = 2 \) and \( \lim_{x \to 1^+} f(x) = 0 \) are not equal. This absence of equality implies a discontinuity at \( x = 1 \) for this function.
Understanding these conditions will help you recognize points of discontinuity effectively in various mathematical contexts.
- The function \( f(x) \) is defined at \( x = c \).
- The left-hand limit \( \lim_{x \to c^-} f(x) \) and right-hand limit \( \lim_{x \to c^+} f(x) \) both exist.
- The left-hand and right-hand limits are equal, and both are equal to \( f(c) \).
In our exercise, continuing the function at \( x = 1 \) would mean that \( f(1) = 1 \), yet the two-sided limit \( \lim_{x \to 1} f(x) \) does not exist since \( \lim_{x \to 1^-} f(x) = 2 \) and \( \lim_{x \to 1^+} f(x) = 0 \) are not equal. This absence of equality implies a discontinuity at \( x = 1 \) for this function.
Understanding these conditions will help you recognize points of discontinuity effectively in various mathematical contexts.
Other exercises in this chapter
Problem 19
Identify the horizontal and vertical asymptotes, if any, of the given function. $$ f(x)=\frac{2 x^{2}-2 x-4}{x^{2}+x-20} $$
View solution Problem 19
Determine if \(f\) is continuous at the indicated values. If not, explain why. \(f(x)=\left\\{\begin{array}{cl}1 & x=0 \\ \frac{\sin x}{x} & x>0\end{array}\righ
View solution Problem 19
Evaluate the given limit. $$ \lim _{x \rightarrow 3} x^{2}-3 x+7 $$
View solution Problem 19
A function \(f\) and \(a\) value \(a\) are given. Approximate the limit of the difference quotient, \(\lim _{h \rightarrow 0} \frac{f(a+h)-f(a)}{h},\) using \(h
View solution